If you have a wireless HP printer for supporting your job, it is important for you to get more information about the process installation so you can be sure that it is installed properly so you can use it anytime. This process must be done very well so you can take benefits form it since it will work well for your needs. To help you in knowing more about the process, just check this article out.
1. The first step you need to do is to insert the CD installer into your CD-room because this CD is a software that will allow you in the process of configuration and initialization of network settings so you can be sure that it will work well for your needs.
2. The second step you must know is to follow the procedure given because the information will guide you at the right process of installation so you must be sure to check it carefully.
3. After the process is prompted, it is your time to turn on your HP printer. Just be sure that the printer is able to be recognized by your computer so you can make this process easier. If it can not detect, it is better for you to consider about the USB cable. It means that you need to take it and install it again to make you sure that it installs properly.
4. Then, you have to choose the right printer name and IP address for your needs. About this address, you can create it yourself so you do not need to be worried about it. After that, you just need to continue the process and the steps will be provided by the software you have been used. In fact, this process will take up to 30 minutes so you have to be patient while doing this thing for your needs.